Lightweight Fireproof Insulation Board Lightweight Insulation Prefab EPS Concrete Cement Sandwich Wall Panel for Prefab Prefab House

Product DescriptionSandwich Panel, EPS Sandwich Panel1. ZJT Sandwich Panel Type-- With EPS grain--With Ceramsite2. ZJT Sandwich Panel CompositionFace: Calcium Silicate BoardCore: Cement+EPS Polystyrene Foam+Sand3. ZJT Sandwich Panel SpecificationsItem60X75X90X120X150XWeight48KG/m255KG/m260KG/m272KG/m288KG/m2Thickness60mm75mm90mm

Featured Products

Product Description


Sandwich Panel, EPS Sandwich Panel

1. ZJT Sandwich Panel Type
-- With EPS grain
--With Ceramsite

2. ZJT Sandwich Panel Composition
Face: Calcium Silicate Board
Core: Cement+EPS Polystyrene Foam+Sand
Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House

3. ZJT Sandwich Panel Specifications
Item60X75X90X120X150X
Weight48KG/m255KG/m260KG/m272KG/m288KG/m2
Thickness60mm75mm90mm120mm150mm
Length1220mm/2270mm/2440mm
Width610mm
Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House

Why choose our compound sandwich panel?  
 FeaturesMore detail
1Green100% free of harmful substances and are of A non-radioactive products, standard GB6566-2001. 
2Lightweight economicThe volume-weight only 750-800kg/m3, the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry. 
3Increase valid spaceThe thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2 per 11.8mm. In other words, it can increase 6/m2 per 100/m2. 
4Moistureproof waterproofWill keep dry and leave no stains. During humid days, the boards will not condense water either. Suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof. 
5FireproofFireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree. The nonflammable performance reaches national A-class standard. 
6Heat insulationZJT board is composed of special material to keep heat and thermal within a favorable condition. At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level. 
7Sound insulationThe raw materials of ZJT boards have good performance in sound insulation. ZJT board with 90mm thickness gains sound insulation of 42dB. 
8Walls can be nailed and groovedZJT board can be grooved to have conductor arrangement or nailed to hang heavy object. The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on. 
9Good integrationBy using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry. 
10Easy and fast constructionIt can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of plastering. 

Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House




5. ZJT Sandwich Panel Application

Non-load bearing interior & exterior wall panels, partition wall panels, floor panels, roof panels. Bathrooms, kitchens, garages, basements, prefabricated houses, family homes, dormitories, residences, apartments, luxurious villas, factory warehouses, production workshops, auxiliary plants, hotels, bars, shopping malls, restaurants, schools, hospitals, airports, etc. 

Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House


Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House












Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House



Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House

Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House


ZJT Sandwich Panel Packing

Packaging Details: 

1. Free packing (with normal pallet and packing belt) 2. Standard exporting packing (wrapped with plastic thin film, wedge protect and good pallet)

Delivery Detail: 

10-15 days
Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House



Parameter/Index/Specifications. 
ItemParameter Index Specifications  
60mm75mm90mm100mm120mm150mm180mm
1Anti-impact capacity/times≥5≥5≥5≥5≥5≥5≥5
2Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥5.0≥5.0≥7.0
3Compressive strength/MPa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5
4Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8
5Surface density(kg/m2)≤70≤70≤90≤90≤110≤110≤130
6Moisture rate(%)≤10≤10≤10≤10≤8≤8≤8
7Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5
8Hang force(N)≥1000≥1000≥1000≥1000≥1000≥1000≥1000
9Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥50≥55
10Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.5≥6.0
11Heat transfer coefficient(w/m2. K)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0
12Inner radiation index≤1≤1≤1≤1≤1≤1≤1
13Outer radiation index≤1≤1≤1≤1≤1≤1≤1
14Frost resistance(shall show no visible cracks and surface without change)__Shall show no visible cracks and surface without change
15The combustion properties(A1 or A2)__A1 or A2


EPS Cement Wall Panels Installation Process

(1). Alignment, transportation of materials

In the installation position of the shell wall plate, the beam is placed vertically to ensure the installation of wall panels is aligned. A 1.5 square meter board can be carried freely by 2 people. 

(2). Sawing of panels

According to the requirements of mobile machines with an arbitrary cut, adjust the width and length of the wall so that the risk of damage is minimized. 


(3). Sizing

Using a specific proportion of slurry and water to turn into a paste, use water to even up the bumps. After that, apply polymer mortar in the grooves in the wall and in the baseline of the wall. 

(4). Fitting the sheet

After moving the mortar-covered wall panels to their respective positions, align them vertically with the baseline. Use the crowbar to ensure the wall panels are tightly fitted with one another. 


(5). In place

Place the walls together closely so that excess mortar can be scraped away. Finally, temporarily fix the wall in place. 

(6). Adjustments

Check the adjustments of the wall and make the necessary adjustments. 


(7). Filling of joints

One day after the wall is set up, slurry will be used to fill in the gaps between panes. 

(8). Installation of crack-resistant material

Three to five days after the joints are filled, crack-resistant materials will be pasted along the joints. 


(9). Insertion of wires

An electric saw will be utilized for the creation of grooves in which switch boxes and wires can be implanted. Any gaps left behind can be filled with mortar. 

(1o). Plastering of paint

To finish the wall, tiles may be fitted without any scraping. Wallpaper may also be applied directly onto the wall. 


(11). Installation of door frame

Many types of door frames can be fitted in the wall. The plywood can be secure with nails and wall anchor. 

(12). Fitting of door and window

Preparing a door and window hole on the installed wall, anchoraging it with splint or lines. 




About us
Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. We can produce more than 2 million square meters of various wall materials annually. 

Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House




 

FAQ
1. Is EPS cement sandwich panel lightweight? 
Yes, it is. Capacity six hundred and fifty to eight hundred KG per cubic meter, it is one sixth of brick wall, even is one half of aerated concrete block
2. Is EPS cement panel fireproof? 
Yes, it is. It control fire slipping out of the origin unit, prevent fire spreading, prevent toxic gas generating or insolating Through fire high temperature test for four hours, panels only have skin injury
3. Is EPS cement panel thermal insulation? 
Yes, it is. EPS cement panel's composite material determines that it has excellent heat insulation and thermal insulation functions
4. Is EPS cement panel soundproof? 
Yes, it is. EPS cement panel's surface is fiber cement board, interior composite material and the concave-convex grooves between two panels make it has excellent sound absorption and soundproof function. 100mm thickness isolate sound beyond 45dB, it's much higher than blockwork
5. Is EPS cement panel strength strong? 
Yes, it is. Anti-impact performance is 1.5 times of the blockwork, With steel structure fixed, can make high levels, big span wall, overall anti-seismic performance is 10 times of normal blockwork
6. After installation can it be paint without putty? 
Yes, it can. You can paint directly without putty, and also can decorate without plastering

Lightweight Fireproof Insulated Panel Light Weight Insulated Precast EPS Concrete Cement Sandwich Wall Panel for Prefab Precast House


For detail installation video please check the link as below

Https: //www. Youtube. COM/watch? V=rgAhBnnnFA0

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours